Carrello
Non ci sono più articoli nel tuo carrello
Delock External Enclosure for 3.5″ SATA HDD with USB Type-C™ female transparent - tool free
42623
Nuovo
Description
This plastic enclosure by Delock can be used for the installation of a 3.5″ SATA hard drive. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.
Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5″ SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 179 x 116 x 30 mm
• Hot Swap, Plug & Play
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
System requirements
• Chrome OS 75.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• 3.5″ external enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
This plastic enclosure by Delock can be used for the installation of a 3.5″ SATA hard drive. The included USB cables allow the connection to a free USB Type-A or USB-C™ port.
Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
1 x DC jack
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• On / Off switch
• Suitable for 3.5″ SATA HDD:
SATA HDD up to 6 Gb/s
HDD up to 10 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 179 x 116 x 30 mm
• Hot Swap, Plug & Play
Power supply specification
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.0 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
System requirements
• Chrome OS 75.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-C™ port or
• PC or laptop with a free USB Type-A port
Package content
• 3.5″ external enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 50 cm
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual
Nuovo
4043619426232
Uilizza questo modulo per richiedere maggiori informazioni o un preventivo personalizzato per questo prodotto
Uilizza questo modulo per richiedere maggiori informazioni o un preventivo personalizzato per questo prodotto
Tocca per zoommare
