Carrello
Non ci sono più articoli nel tuo carrello
Delock External Enclosure for 2.5″ SATA HDD / SSD with USB Type-C™ female transparent - tool free
42621
Nuovo
Description
This plastic enclosure by Delock can be used for the installation of a 2.5″ SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.
Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 125 x 79 x 13 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 2.5″ external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 50 cm
• Stand
• User manual
This plastic enclosure by Delock can be used for the installation of a 2.5″ SATA hard drive or SSD. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.
Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.
HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.
Specification
• Connectors:
external:
1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ female
internal:
1 x SATA 6 Gb/s 22 pin receptacle
• Suitable for 2.5″ SATA HDD / SSD:
HDD height up to 9.5 mm
SATA HDD / SSD up to 6 Gb/s
supports 5 V HDD / SSD
HDD / SSD up to 4 TB
• Chipset: VIA VL716
• Data transfer rate:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 125 x 79 x 13 mm
• Hot Swap, Plug & Play
System requirements
• Chrome OS 74.0 or above
• Linux Kernel 3.3 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• 2.5″ external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 50 cm
• Stand
• User manual
Nuovo
4043619426218
Uilizza questo modulo per richiedere maggiori informazioni o un preventivo personalizzato per questo prodotto
Uilizza questo modulo per richiedere maggiori informazioni o un preventivo personalizzato per questo prodotto
Tocca per zoommare
